Horizontal flow inclined tube (plate) sedimentation tank/vertical flow sedimentation tank

Category：

The inclined tube (plate) settler is made according to the sedimentation principle of the horizontal sedimentation tank to remove fractional particles. By increasing the inclined tube in the tank, the hydraulic radius is reduced, and at the same time, the area around the water flow section of the tank is increased. Therefore, when the water flow is at the same horizontal velocity V, the Reynolds number Re can be greatly reduced, so as to reduce the flow storage and promote sedimentation. In addition, adding inclined plates can also shorten the settling distance of particles, reduce settling time, and improve settling efficiency.

Keywords：

vertical flow sedimentation tank

Tel：

HOTLINE：400-678-1829

ZHANG GONG：+86-18865361829

CONSULT

OTHER PRODUCTS

详细介绍

图文详情

1. Equipment Overview
The inclined tube (plate) settler is made according to the sedimentation principle of the horizontal sedimentation tank to remove fractional particles. By increasing the inclined tube in the tank, the hydraulic radius is reduced, and at the same time, the area around the water flow section of the tank is increased. Therefore, when the water flow is at the same horizontal velocity V, the Reynolds number Re can be greatly reduced, so as to reduce the flow storage and promote sedimentation. In addition, adding inclined plates can also shorten the settling distance of particles, reduce settling time, and improve settling efficiency.
The inclined tube (plate) settler is a device consisting of inclined tubes with an inclination angle of 60 degrees installed on the upper layer of the suspended sludge layer. The suspended solids, solids, or flocs formed by adding coagulants in the raw water aggregate into a thin sludge layer on the surface area at the bottom of the inclined plate, slide towards the suspended sludge layer by gravity, and then sink into the sludge collection bucket. The sludge is discharged into the sludge tank through the sludge discharge pipe for further treatment or comprehensive utilization. The supernatant gradually rises to the collection pipe and is discharged gradually It can be directly discharged or reused.

2. Application scope
The sedimentation device is equipped with many parallel inclined or smaller diameter parallel inclined pipes with small intervals, which improves the sedimentation effect and water yield, especially for the removal of dispersed particles. The inclined tube (plate) precipitator is widely used for the same liquid treatment of industrial wastewater, domestic wastewater, coal mine wastewater, non-ferrous metal processing wastewater, power plant, boiler room hydraulic dust removal wastewater, gas station washing water, and also suitable for pre-treatment of water supply purification. The inclined tube (plate) precipitator is widely used in sewage treatment projects in industries such as petroleum, chemical, coal, power, grease, and machinery.

3. Specification parameters

model	JMXG-10	JMXG-20	JMXG-50	JMXG-80	JMXG-100
processing capacity	10m³/h	20m³/h	50m³/h	80m3/h	100m³/h
Overall dimensions	3.5X1.5X2.8m	4.5X2.0X18m	8.0X2.75X2.8m	13X2.75X2.8m	16X2.75X2.8m

ONLINE MESSAGE

*注：请务必信息填写准确，并保持通讯畅通，我们会尽快与你取得联系