Medical (domestic) waste incinerator

Category：

The medical (domestic) waste incineration furnace adopts the advanced incineration method of primary pyrolysis gasification, mixed combustion with surrounding air, secondary incineration, and burnout treatment.

Keywords：

Tel：

HOTLINE：400-678-1829

ZHANG GONG：+86-18865361829

CONSULT

OTHER PRODUCTS

Detail

1. Equipment Overview
The medical (domestic) waste incineration furnace adopts the advanced incineration method of primary pyrolysis gasification, mixed combustion with surrounding air, secondary incineration, and burnout treatment. The design of the primary combustion chamber of the incinerator adopts gasification and incineration technology, which causes the temperature inside the incinerator to shift from 200 ° C to 400 ° C, and the garbage will not produce problems such as melting blocks, slag blocks, and sintering during the incineration process. A secondary incineration burner and a circumferential air supply device are installed in the secondary mixed incineration room.
At high temperatures, combustible gases in the flue gas can be fully burned, efficiently mixing and burning the gas produced by the gasifier with air to prevent the escape of carbon substances and delayed combustion in the gas flame. When the flue gas enters the high-temperature combustion chamber, tangential entry and tangential entry of combustion air are used to support combustion, allowing the flue gas to be fully combusted again in the combustion chamber while using rotating airflow for flue gas dust removal. The incineration flue gas stays in the furnace for more than 2 seconds, completely incinerating the combustible gases in the flue gas and the combustible substances in the fly ash. A dry tail gas purification device is installed in the upper part of the incinerator to purify the hydrogen chloride generated during incineration Sulfur oxides and other substances undergo adsorption treatment, and the odor and other components in the flue gas are decomposed at high temperatures.
The flue gas purification system is equipped with calcium hydride filter bricks for neutralization reaction with acidic gas, achieving the purpose of adsorbing acidic gas and purifying tail gas. Reduce the harmful components in flue gas to below the specified values in national standards such as the "Pollution Control Standard for Hazardous Waste Incineration" (GB184S4-2001)

2. Specification parameters

model	Incineration capacity (kg)	Size of garbage input port (mm)	Chimney (m)	Induced draft fan power (kW)	Boosting combustion Yan Shaoqi	Reburning burner	Operating voltage (v)	Incinerator body size (m)	Incinerator weight (kg)
JMYF-30	≤ 0.2 tons 20-30Kg/time, 3-6 times/day (12 hours)	480X600	outside diameterΦ280	0.37kw	Power 0.11kw Fuel consumption 4-6 kg/h	Power 0.11kw Fuel consumption 4-6 kg/h	380or220	1.45x0.9x1.75	2.800
JMYFS-50	≤ 0.3 tons 30-50Kg/time, 3-6 times/day (12 hours)	620X800	outside diameterΦ280	0.37kw	Power 0.11kw Fuel consumption 4-10kg/h	Power 0.11kw Fuel consumption 4-10kg/h	380or220	1.8x1.15x3	4,500
JMYFS-150	≤ 0.9 tons 100-150Kg/time, 3-6 times/day (12 hours)	760 X960	outside diameterΦ300	0.5kw	Power 0.11kw Fuel consumption 5-12kg/h	Power 0.22kw Fuel consumption 7-14kg/h	380or220	2x1.4x3.5	7,900
JMYFS-3OT	≤ 1.8 tons 200-300Kg/time, 3-6 times/day (12 hours)	900X1100	outside diameterΦ400	1.1 kw	Power 0.22kw Fuel consumption 7-14kg/h	Power 0.37kw Fuel consumption 10-20kg/h	380or220	2.2x1.4x3.8	9.000
JMYFS-5O0	≤ 3 tons 300-500Kg/time, 3-6 times/day (12 hours)	1080X1280	outside diameterΦ460	1.1 kw	Power 0.22kw Fuel consumption 7-14kg/h	Power 0.37kw Fuel consumption 15-26kg/h	380or220	3x2x4.8	14.000

ONLINE MESSAGE

*Note: Please make sure to fill in the information accurately and maintain smooth communication. We will contact you as soon as possible